Skygard - the load-supporting guardrail system for green roofs and gravel roofs
Load-supported guardrail system with verifiable static calculation for installation on flat roofs with private use up to DN 3° with special hinged base for vertical 3D adjustment of the guardrail posts.
For roof areas that open up additional open spaces, special requirements apply with regard to the respective use, the covering and the installation height. With SkyGard, we offer a load-bearing and penetration-free aluminum railing system for green roofs, gravel roofs and roof terraces. The system meets all safety requirements and leaves plenty of scope for individual wishes.
Product properties
| Material | Aluminium |
| Load | 120 kg/m² |
| Use | Private use |
| Private use | Horizontal beam load 0.5kN/m |
| Cantilever rail | 2.00 m |
| Load-bearing plates | 400x951x2.5 |
Area of use
- SkyGard is the railing system for private use
- Can be used with glass infill up to wind zone 2 (with rod infill up to wind zone 3)
Specific properties
- Complete system with object-related calculation of the tilt proof
- Load-bearing system and therefore no penetration of the roof waterproofing
- Railing system with warranty and verifiable static calculation (up to beam load 0.5kN/m)
- Many design options thanks to modular system
- Durability thanks to corrosion resistance
Good to know
- Infills: Bar infill (round or rectangular bar) full-surface / partial-surface. Attachment: BEFORE the supports
- Infills: Glass infill (frosted or clear glass) full-surface / partial-surface. Attachment: BEFORE the posts
- Railing foot position on the cantilever rail, taking into account the necessary load distribution plates, freely selectable
- Checkable static calculation
- Reduced bar spacing possible in accordance with playground regulations (max. 89 mm clear dimension)
- If the distance between the floor covering and the lower edge of the panel is > 12 cm, a plinth rail is required!
Accessories
- Door, locking with cylinder lock incl. handle set - no panic lock possible
- Base rail for mounting on post sleeve for particularly low layer structures
- Hinged base with adapter plate as interface for external railings